Once the code is inserted and saved, refresh the GSDT to run the test again to ensure that the product schema and aggregateRating is showing up well. There should not be any errors present in the schema In cases where metafield is not present in a Shopify store (syndicated stores) A different set of rich snippet codes needs to be installed, which rely on pulling the review data from widget directly instead of the Shopify metafields:

DynaVap OmniVap Titanium XL Vaporizer

Sale price $280.00
/
Shipping calculated at checkout.

DynaVap OmniVap Titanium XL Vaporizer
DynaVap OmniVap Titanium XL Vaporizer
CHOOSE BETWEEN THE 2021 AND 2020 MODEL. BOTH ARE AVAILABLE!

The OmniVap Titanium XL vaporizer is the best that DynaVap has to offer. It is designed with a titanium construction from the tip to the mouthpiece and is exceptionally lightweight. The condenser can adjust its position to reduce and virtually eliminate the need to control the air to vapor ratio. The titanium tip is also adjustable so you can reduce the amount of herb used in each dose.  

What's included:

  • 1 DynaVap OmniVap Titanium XL Vaporizer body
  • 1 DynaVap Titanium Condenser
  • 1 DynaVap Titanium Mouthpiece
  • 1 DynaVap Titanium Tip
  • 1 DynaVap Cap
  • 1 DynaVap Storage Tube/Carrying Case

DynaVap's flagship thermal extraction device, The Omni.

The tip: Nona notched completely contoured extraction chamber incorporates a 2 position adjust-a-bowl and a trisected 9 fin profile.

The stem: enhanced with an intuitive tactile navigation geometry and is supplemented with twin turbulating airports. Opposite the airport, you will find a compound angled rocker.

The Omni Series’ prime feature of airflow control has been elevated to include a dial-indicator for visualization of adjustment and a variable pitch, helical heat-exchanging condenser.

To use your VapCap:
  1. Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
  2. The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
  3. If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
  4. When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
  5. Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
  6. Place the cap back on the VapCap.
  7. Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
  8. Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
  9. Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
  10. Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
  11. When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
  12. When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
  13. Reload for another round of simple and wonderful vapor.

Tips:
  1. It is recommended that you use a butane torch style lighter with your VapCap.
  2. Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
  3. It is VERY important to wait until you hear the cool down click before applying more heat.
  4. Stop heating your VapCap as soon as you hear the click until you get to know each other better.
  5. You can vary the intensity of the flavor by using the air/vapor adjustment port.
  6. Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
  7. DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
  8. The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
  9. The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.