Name: DynaVap M Vaporizer
Brand: DynaVap
Price: 84.99 CAD
Availability: InStock
Rating: 0 (0 reviews)

DynaVap

DynaVap M Vaporizer

$94.99 $84.99 Save $10.00

Choose between the brand new 2020 DynaVap M vaporizer and the 2019 DynaVap M vaporizer, at a reduced price. Both versions are in stock and shipping now!

The DynaVap line of vaporizers is designed to deliver a truly simple and potent experience for the user. The M is made of 100% medical grade stainless steel and the unibody design is equipped with a mouthpiece, removable tip, and condenser tube. There is no better bang for your buck in the vape industry than the M.

What's included:

1 DynaVap M Vaporizer
1 DynaVap Stainless Steel Tip
1 DynaVap Cap
3 condenser O-Rings
4 High Temperature O-Rings
1 Stainless Steel CCD Scren

The 2020 "M", still constructed from medical grade stainless steel, now features the Captive Cap functional geometry, faceted tip with airflow serrations, adjust-a-bowl technology to reduce the extraction chamber by 50% for easy micro-dosing, chiral airports for calibrated high turbulence air injection, and a 10mm tapered mouthpiece.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

BEWARE OF FAKES! DYNAVAP HAS INFORMED US OF COUNTERFEIT DYNAVAP M AND SPECIAL EDITION M VAPORIZERS BEING SOLD IN CANADA. WE ARE LISTED ON DYNAVAP.COM AS AN AUTHORIZED RETAILER.

DynaVap

DynaVap Fat Mouthpiece

$2.99

Authentic silicone mouthpiece cover for all DynaVap Vaporizers. This tip will help with cold and uncomfortable metal mouthpieces and can be used as a water pipe adapter. One of the most useful DynaVap accessories!

DynaVap

DynaVap DynaKit Basic

$26.99

The DynaKit has everything you need to get the most out of your DynaVap vaporizer. Keep it looking and feeling like new, long after purchase.

The DynaVap DynaKit Basic includes:

SS Condenser O-Rings (3 pack)
High-Temp O-Rings (5 pack)
Stainless Steel CCD (3 pack)
Fat Mouthpiece
DynaWax
Cotton Pipe Cleaners (5 pack)
Green Storage Tube
Purple Storage Tube

DynaVap

DynaVap 2020 M Starter Pack

$174.99 $169.99 Save $5.00

2020 M Starter Kit is shipping now!

The DynaVap 2020 M Starter Pack offers everything a new VapCap user needs. The “M” is crafted from medical grade stainless steel and is the perfect introduction to DynaVap’s VapCaps. This package also includes an Honest single flame lighter which provides optimal heating results, as well as a Cedar or Walnut Dynastash. The Dynastash includes a VapCap garage, extra storage compartment and an integrated DynaMag. The DynaMag will secure your Dynastash to any magnetic surface, help remove a hot cap and hold any VapCap at attention. The DynaWax will help extend the life of the O-rings and when it comes time to clean your VapCap. The Pipe Cleaners are perfect for removing any buildup. This kit comes with every replacement part one would need for the “M”.

What's Included:

DynaVap 2020 M Vaporizer
Dynastash: Cedar or Walnut
Honest Single Flame Torch
Cotton Pipe Cleaners- hard bristle (5 pack)
DynaWax
3 extra High Temp O-rings
2 extra Condenser O-rings
1 extra Stainless Steel CCD Screen
DynaCoil (OPTIONAL)

Torches, as always, are shipped without fuel.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap DynaStash Storage Containers

$59.99

The DynaStash is now available in Walnut, Cedar, Purple Heart, Wenge and Maple!!

DynaStash fits DynaVap M, OmniVap, OmniVonG, HydraVonG, NonaVonG-S,and NonaVonG vaporizers.

DynaStash ER fits all of the same sizes as the DynaStash but includes a storage container for concentrates built in.

DynaStash XL fits DynaVap OmniVap XL, NonaVonG-XLS, HydraVonG-XLS DynaVap vaporizers.

The DynaStash is one of the most perfect complements to any standard M, OmniVap, OmniVonG, HydraVonG, and NonaVonG vaporizers. It holds your DynaVap vape as well as a reserve of your favorite herb and concentrates on the go. Another awesome feature of the DynaStash is the magnetic holder. This will hold your DynaStash to any magnetic surface as well as hold a VapCap at attention. Store your vap in style with the DynaStash case. Includes an integrated magnet to hold your VapCap and to help remove the hot cap.

Wood graining, as always, be unique to each piece as they are natural.

DynaVap Stainless Steel CCD Screen (3 Pack)

DynaVap

DynaVap Stainless Steel CCD Screen (3 Pack)

$9.99

Stainless Steel screen pack for the DynaVap M Vaporizer. Includes 3 replacement screens included per pack.

DynaVap

DynaVap Titanium CCD Screen (3 Pack)

$14.99

Titanium screen pack for the DynaVap M Vaporizer. Includes 3 replacement screens per pack.

DynaVap

DynaVap Cap

$26.99

This is where the magic happens! Replacement cap for the entire line of DynaVap vaporizers. The brilliant "double click" will let you know when it's ready to go. Fits all DynaVap stainless steel and titanium tips.

Pro Tips: when heating your DynaVap vaporizer, use a focused butane torch with a flame about 1"-1.5" long. Keep the heat focused on the bottom half of the cap and spin the vaporizer so the flame doesn't hot spot the cap. Respect the "click"! Once you hear it, stop heating.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap DynaCoil

$33.99 $29.99 Save $4.00

The DynaCoil is a precision engineered concentrate adapter, constructed from one continues piece of medical grade titanium, and is compatible with all VapCap vaporizers.

It is designed for use with many full melt concentrates, as well as thick oils and liquids.

The intricate construction holds concentrates in position while providing ample space for vapor egress.

DynaVap

DynaVap High Temp O-Ring (5 Pack)

$6.99

Compatible with all stainless steel tips (M), Titanium Tips and OmniVap Condenser and Mouthpiece Assemblies.

DynaVap

DynaVap OmniVap Titanium XL Vaporizer

$239.99

The OmniVap Titanium XL vaporizer is the best that DynaVap has to offer. It is designed with a titanium construction from the tip to the mouthpiece and is an exceptionally lightweight. The condenser can adjust its position to reduce and virtually eliminate the need to control the air to vapor ratio. The titanium tip is also adjustable so you can reduce the amount of herb used in each dose.

What's included:

1 DynaVap OmniVap Titanium XL Vaporizer body
1 DynaVap Titanium Condenser
1 DynaVap Titanium Mouthpiece
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap M Special Edition Vaporizer

$109.99 $74.99 Save $35.00

$30 OFF of the Shadow M!!!

The Special Edition DynaVap M Vaporizers are here! PhantoM, AuruM, and RosiuM Special Editions are all in stock and shipping now!!

The DynaVap line of vaporizers is designed to deliver a truly simple and potent experience for the user. The M is made of 100% medical grade stainless steel and the unibody design is equipped with a mouthpiece, removable tip, and condenser tube. There is no better bang for your buck in the vape industry than the M.

What's included:

1 DynaVap M Special Edition Vaporizer
1 DynaVap Stainless Steel Tip
1 DynaVap Cap
1 DynaVap Storage Tube

BEWARE OF FAKES! DYNAVAP HAS INFORMED US OF COUNTERFEIT DYNAVAP M AND SPECIAL EDITION M VAPORIZERS BEING SOLD IN CANADA. WE ARE LISTED ON DYNAVAP.COM AS AN AUTHORIZED RETAILER.

The Shadow is made from the 2018 DynaVap M vaporizer. The PhantoM, RosiuM, and AuruM are made from the 2019 DynaVap M vaporizer.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap Titanium Tip

$54.99

Replacement tip for the OmniVap Vaporizer. Compatible with all DynaVap bodies. The new 4 fin tip (not pictured) is now shipping.

DynaVap

DynaVap Condenser O-Ring (3 Pack)

$3.99

Spare condenser O-rings for use in all devices, except for the OmniVap and M.

The Herb Cafe

DynaVap Glass Cooling Stem

$21.99 $19.99 Save $2.00

New Colors IN STOCK!

These custom made glass stems are designed to cool the vapor from the DynaVap tip. The dimples in the glass create more surface area for the vapor to traverse and cools the temperature along the journey. Our stems are 75mm (3") in length, which is the same length as the XL and XLS sized DynaVap models.

DynaVap

DynaVap NonaVonG-S Vaporizer

$159.99 $129.99 Save $30.00

The NonaVonG-S is the right DynaVap for you if you want to use it with a bubbler or water filter glass and still have the option to use it as a stand-alone vaporizer. It's designed with a tapered 14mm body and a carb hole, controlled by the user, for the right air to vapor ratio. It comes with a spinning wooden mouthpiece.

What's included:

1 DynaVap NonaVonG Vaporizer wooden body
1 DynaVap Spinning Wood Mouthpiece
1 DynaVap Stainless Steel Condenser
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap Low Temperature Cap

$29.99

The Low Temperature Cap provides a whole new experience with your VapCap. This Cap provides great flavors and a lower heating temperature, all while preserving your material. The Low Temperature Cap also comes with a unique logo on it to differentiate it from your standard Cap.

*Compatible with all VapCaps

Pro Tips: when heating your DynaVap vaporizer, use a focused butane torch with a flame about 1"-1.5" long. Keep the heat focused on the bottom half of the cap and spin the vaporizer so the flame doesn't hot spot the cap. Respect the "click"! Once you hear it, stop heating.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

Ed's TnT

DynaVap Glass Water Pipe Adapter

$29.99

Use your DynaVap stainless steel or titanium tip with these incredible all glass adapters by Ed's TNT. Get a direct draw through your favourite bubbler or bong with a 14mm or 18mm female port with no carb hole to control. High quality American Made glass. If you know the size of your bubbler or only use one type, this is the adapter to get!

DynaVap stainless steel tip, titanium tip and DynaVap cap are sold separately.

DynaVap

DynaVap NonaVonG Vaporizer

$129.99 $109.99 Save $20.00

The NonaVonG is the right DynaVap for you if you want to use it exclusively with a bubbler or water filter glass. It's designed with a tapered 14mm body and a carb hole, controlled by the user, for the right air to vapor ratio. It does not come with a mouthpiece but one can be added, if you choose to upgrade, down the line.

What's included:

1 DynaVap NonaVonG Vaporizer wooden body
1 DynaVap Stainless Steel Condenser
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap Universal Glass Water Pipe Adapter

DynaVap

DynaVap Universal Glass Water Pipe Adapter

$21.99

All glass water pipe adapter specifically designed for use with the DynaVap tip and cap. It's tapered design will fit a 14mm and 18mm female joint.

DynaVap tip and cap sold separately.

DynaVap

DynaVap Apollo 2 Induction Heater

$189.99 $179.99 Save $10.00

DynaVap's first induction heater is finally here! The DynaTec Induction Heater is designed by Lucid Customs. Lose the torch and heat your DynaVap vaporizers with a controlled heating element.

The Apollo 2 is a Dynavap induction heater engineered from the ground up by Lucid Customs specifically for use with the Dynavap vaporizers. Enjoy smooth, fast and consistent hits in 6-12 seconds every time with stainless steel or titanium tips. It's simple to operate: just press the Dynavap into the chamber until you hear the heat-up click. A momentary tactile switch is built into the chamber to ensure the heater is only activated when a Dynavap is inserted. An automatic shutoff feature will only allow heating for 15 seconds at a time and dual automatically resettable fuses protect the circuit from over current situations. The Apollo features a galaxy cover accent and authentic Dynavap magnet on the top. Included with each Apollo heater is an instruction guide and a 120-240V power supply or charger with North American style plugs. They will work worldwide with proper plug adapters.

Simrell Collection DynaVap Vortex & Intercooler Stem

Simrell Collection

Simrell Collection DynaVap Vortex & Intercooler Stem

$199.99

These incredible Titanium stems by Simrell Collection are in stock!

The Simrell Stems are also available in an array of beautifully Anodized colours and a shorter version of the XL size.

Upgrade your Dynavap

Improve your Dynavap with cooler vapor, better airflow, and the kind of class that can only be found with the Simrell Vortex. Dynavap vaporizers have taken the market by storm with their minimalist design that fits in any pocket, and is instantly ready to vape. With a little practice, this flame powered vape delivers tasty, powerful vapor from small amounts. Shaped like a cigarette, it makes for an easy transition from smoking to vaporizing. The Dynavap lives by simplicity and elegance, ditching the batteries for any other heat source. The Vortex Stem builds on that, adding a touch of class with a luxurious, top-shelf feel and improved performance.

Simply sophisticated

The Vortex Stem is built from medical grade titanium, with a philosophy of “simple sophistication.” Expertly crafted with the smoker in mind, its torpedo, pen-shaped body mimics the look and feel of a well-rolled joint. The tapered shape mates with any 10mm connection, so you can drop it in your favorite glass pipe. The distinctive Simrell logo is artistically offset from the airport. When you look at the logo head on, you can see straight through the airport, into the unobstructed airpath that creates the vortex.

Offset airport changes the game

With the original Dynavap, air enters through the airport and randomly disperses around the insulation tube before reaching the heating chamber. With the Vortex Stem, however, air spirals around the tube, creating a vortex that literally pulls the vapor out of your herbs, for denser, thicker hits. The airport’s teardrop shape and tapered edge let you fine tune the air flow like never before.

Coolest Dyna-vapor around

The Vortex Stem’s durable, medical grade titanium intercooler produces some of the coolest, smoothest vapor you can get from a Dynavap, with even more air flow. Its spiral shape lengthens the vapor path, and creates more surface area to cool the vapor before reaching your lips. As an added bonus, the Vortex Stem can be used with any vaporizer you it attach to. Pull off the Dynavap tip, grab an adapter, and use your imagination!

One piece, easy to clean design

Cleaning the Vortex Stem couldn’t be easier, due to its unibody design without o-rings. Remove the intercooler from the stem, and soak both parts in some rubbing alcohol (we recommend using isopropyl alcohol, with an alcohol content of 91% or higher, to protect the anodizing). Rinse, dry, assemble, and vape!

Add just the tip and cap

The Simrell Vortex includes the unibody and intercooler, and works with any Dynavap tip and cap (not included). To complete the kit, you will need a Dynavap tip and a Dynavap cap, or use your existing ones. To upgrade your current Dynavap, simply swap your current body, condenser tube and o-rings for the Simrell Vortex. Assembly is a snap with the Simrell unibody design.

Once assembled with the DynaVap Tip & Cap, the entire set up will fit in a DynaStash XL case or DynaVap Storage Tube XL for travel.

DynaVap

DynaVap OmniVonG XL Vaporizer

$229.99 $219.99 Save $10.00

Variable Vapor Flow Adjustment just like the OmniVap. This model includes a 14mm Dark Wood, or Light Wood NonaVonG Stem midsection with Omni Mouthpiece assembly. With the 14mm taper built into the stem, it mates perfectly with most 14mm adapters. The Omni system has a specialized design to allow for simple adjustment of flow restriction, allowing complete control of the vapor to air intake ratio. Adjust by simply twisting the mouthpiece, which extends/retracts the condenser into the back end of the tip. It is not compatible with the M Tip or body midsections.

** Coloration and/or grain patterns may vary **

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap XL Storage Tube

$6.99

This is the same storage container that comes with the OmniVap Titanium XL and all DynaVap XL and XLS vaporizers. Will fit a 75mm set up.

DynaVap

DynaVap XL Condenser

$24.99

The XL condenser comes with all required O-rings. Add a spinning mouthpiece with this condenser to any standard length (62mm) VapCap midsections and the setup will help provide a more even temperature gradient when heating.

DynaVap

DynaVap OmniVonG Vaporizer

$219.99

The OmniVonG is the right DynaVap for you if you want to use it with a bubbler or water filter glass and still have the option to use it as a stand-alone vaporizer. It's designed with a tapered 14mm body and a carb hole, controlled by the user, for the right air to vapor ratio. It comes with a titanium mouthpiece and condenser so the user can adjust its position to reduce and virtually eliminate the need to control the air to vapor ratio. The titanium tip is also adjustable so you can reduce the amount of herb used in each dose. It' the OmniVap and NonaVonG all mixed in one!

What's included:

1 DynaVap NonaVonG Vaporizer wooden body
1 DynaVap Titanium Mouthpiece
1 DynaVap Titanium Condenser
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap Spinning Wood Mouthpiece

$19.99

Beautiful hardwood handcrafted into beautiful and functional mouthpieces to help you take your DynaVap vaporizer for a spin and provide a more even temperature gradient when heating.

For use with a body length (45mm) midsection, a standard condenser is required - overall device length is 92mm.

For use with a stem length (62mm) midsection, an XL condenser is required - overall device length is 109mm. These mouthpieces slide onto the condensers.

** Coloration and/or grain patterns may vary

DynaVap

DynaVap Stainless Steel Tip

$39.99

The new 2019 Stainless Steel DynaVap M Tip is now in stock! Upgrade an older 2017 or 2018 model without buying the body again!

Replacement tip for the DynaVap M Vaporizer. Compatible with all DynaVap bodies. This is the same original OEM tip that comes preinstalled on the M manufactured by DynaVap.

DynaVap

DynaVap DynaWax

$7.99

DynaWax is a locally sourced beeswax with hemp oil added for consistency. DynaWax is designed for lubricating o rings, polishing wood midsections/mouthpieces, and Dynastashes.

Now comes in a clear case.

DynaVap

DynaVap HydraVonG-XLS Vaporizer

$159.99 $139.99 Save $20.00

At 109mm, the HydraVonG XLS has a spinning mouthpiece combined with a 62mm Stem and a Titanium Tip. The Stem is tapered to fit 14mm adapters nicely. This device features an organic design, improved tactile geometry, and a better grip. The discreet airport allows the user to manually modify the air to vapor intake ratio.

What's included:

1 DynaVap HydraVonG-XLS Vaporizer wooden body
1 DynaVap Spinning Wood Mouthpiece
1 DynaVap Stainless Steel Condenser
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap Spinning Titanium Mouthpiece

$39.99

Solid medical grade titanium, precision machined into a beautiful and functional spinning mouthpiece that helps provide a more even temperature gradient when heating.

Can be used with a Body length midsection and spins on a Standard SS or Ti Condenser (overall device length is 92mm) or a Stem length midsection which spins on an XL SS or Ti Condenser (overall device length is 109mm.)

The Herb Cafe

DynaVap Glass Serpent Stem

$29.99 $19.99 Save $10.00

This custom made glass cooling stem uses the DynaVap tip and cap and replaces the standard DynaVap midsection body for increased distance in the vapor path. And being all glass, there is no imparted flavor. It's 12cm long but stretched out would be over 30cm long. This increased distance cools the vapor drastically compared to the stock set up.

It's mesmerizing to see the Serpent's venom coil through the glass!

DynaVap tip and cap sold separately.

DynaVap

DynaVap Cap N' Coil Tip Kit

$64.99

GET A FREE Glass Cooling Stem for a complete vaporizer set up with the purchase of the Cap N' Coil Kit!

The Cap N’ Coil Tip Kit gives you everything you need for a quick switch to concentrates or oils for your VapCap. This kit includes a Cap, a DynaCoil, and a 2018 “M” Tip. It comes in a Small SnapStash for convenient storage.

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap HydraVonG Vaporizer

$129.99 $114.99 Save $15.00

At 92mm, the HydraVonG includes a 62mm Stem with a Titanium Tip. The Stem is tapered to fit 14mm adapters nicely. This device features an organic design, improved tactile geometry, and a better grip. The discreet airport allows the user to manually modify the air to vapor intake ratio.

We strongly recommend the routine use of DynaWax to clean and moisturize the wood.

What's included:

1 DynaVap HydraVonG Vaporizer wooden body
1 DynaVap Stainless Steel Condenser
1 DynaVap Titanium Tip
1 DynaVap Cap
1 DynaVap Storage Tube

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap OmniVonG XL Special ED-ition Vaporizer

DynaVap

DynaVap OmniVonG XL Special ED-ition Vaporizer

$249.99 $219.99 Save $30.00

We are proud to introduce an exclusive product from DynaVap and Ed's TNT! The OmniVonG XL Special ED-ition Vaporizer features the same internal parts as the OmniVap Titanium XL but fitted into a beautifully made, custom 62mm Ziricotte wooden midsection that features a 14mm taper. Our exclusive Special Edition OmniVonG will drop down perfectly into a bubbler, like our Ultimate Water Pipe, or can be used directly with the assembled mouthpiece.

The Ziricotte was hand selected by Ed himself and has a dark, rich brown and black marble in the grain.

What's Included:

DynaVap Titanium Tip
DynaVap Cap
DynaVap Titanium Condenser XL
DynaVap Titanium Mouthpiece
Ed's TNT Ziricotte 62mm Midsection
DynaVap XL Storage Tube

** Coloration and/or grain patterns may vary **

To use your VapCap:

Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.
Place the cap back on the VapCap.
Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.
Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!
Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.
Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.
When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.
When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”
Reload for another round of simple and wonderful vapor.

Tips:

It is recommended that you use a butane torch style lighter with your VapCap.
Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
It is VERY important to wait until you hear the cool down click before applying more heat.
Stop heating your VapCap as soon as you hear the click until you get to know each other better.
You can vary the intensity of the flavor by using the air/vapor adjustment port.
Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

DynaVap

DynaVap BB9 Glass Stem

$39.99

This glass midsection comes with 9 beads inside for diffusion and features divots along the sides. It contains an air port and is tapered to fit 14mm or 10mm female fittings. The BB9 also connects perfectly with either the Titanium Tip or the Stainless Steel Tip. The BB9 midsection is a great addition to your VapCap accessories collection.

*No condenser necessary

Warranty: The BB9 warranty extends only to damage during shipping. If your BB9 arrives broken or damaged, you must reach out to us within 48 hours of receiving the items to receive a replacement. After 48 hours of receipt, no replacements will be offered

MistVape

DynaVap Glass Bead Cooling Stem

$59.99

Use your DynaVap stainless steel or titanium tip with these incredible glass bead cooling stems by MistVape. Available in 50mm and 75mm lengths and with 4 exotic wood mouthpieces.

DynaVap stainless steel tip, titanium tip and DynaVap cap are sold separately.

Join the THC Team!